Smart waterproof motorcycle heating handle

Please notice

1.Only applicable to motorcycle, electric bike can not be used.

2.125CC (or below) motorcycle is not recommended to buy (reason: insufficient power supply)

3. only support the diameter of 22mm motorcycle handle, according to the original handlebar rubber length, choose the length of the electric handle style!We have two modles:WP012(115MM-125MM),WP013(12MM-135MM),and the length of the electric handle is shorter than that of the original car, but not longer!

4.If necessary, please ask a professional for installation.

5. Before loading, it is recommended to be connected to the positive and negative poles of the motorcycle battery, and then start the motor(when not started,voltage will be insufficient), test whether it can be heated (do not connect in the electric door lock ACC or other small line on, avoid power limitation), test no problem before loading!

6.old motorcycles need to ensure that after connecting the electric handle and start, open the electric handle,

the output voltage should reach 13.5V (or above), otherwise it cannot drive the electric handle (electric handle has low voltage protection function, when the voltage is too low: no heating, red, green and blue light flashing), can check the motorcycle whether the motor or battery need maintenance!

 If the product does not work when used after receiving the goods,

 Please check the product and troubleshoot the problem according to the following points:

1. Whether the installation is conducted according to the installation precautions in the manual;

2. Whether the SAE wire interface is connected properly, and whether the one and two conversion wires are loose;

3. Check whether the safety plate is normal;

4. Check whether the positive and negative poles are connected inversely